GNBER RY-M15-3   Liquid Level Controller Water Pump Float Switch Plastic IP68

Future:

 The product can be used for a long time after it being installed. Almost no maintanance and repairing problem would occur during its operation period. 

 Force the counterweight on the ring by rotating it, using a slight pressure.
 The power supply cable is an integrate part of the device. Should the cable the found 

 Easy installation method, convenient adjustment method: 
 The liquid level control scope can be adjusted at will with the locating piece noving up and down. Only one screw is needed to secure the signal cable to finish installation. 

Rated data and performance  

INSTRUCTION FOR FLOATING SWITCH OF ELECTRICAL PUMP

Float switch is using the micro switch or mercury switch contact element, when the liquid level increased access to the floating ball, floating ball do Angle change along with the rising water levels, when ON the horizontal plane and elevation more than 10 °, switch will be ON or OFF the contact signal output.
 
 Cable float switch has two Chambers, when processing cable float switch to use a special process to seal completely.Through the cable end balance weight can be adjusted to different switch point.

CONSTRUCTION&OPERATION

It consist of a float,integral with a 3 core electric cable.A fixed micro switch and a moving steel ball 

are enclosed within the float casing.A change in liquid level causes the float to tilt up or down around 

a pivot,provided in the form of an adjustable stopper or support pipe,at an angle and in the process,

actuating a steel ball to move and operate a micro switch plunger to close or open an electrical circuit 

with potential free contacts,to operate auxiliary electrical devices like alarm,pump and solenoid valve.

0;potential free contacts,to operate auxiliary electrical devices like alarm,pump and solenoid valve.

WARNING
1. The power supply cable is an integrate part of the device. Should the cable the found to be damaged the device is to be replaced. Repairs to the cable itself are not possible. 
2. The cable terminal must be never immersed into water. 
3. The cable that is not used must be correctly insulated. 
4. The electrical pump must be grounded to avoid any accidents. 

Competitive Advantage:

Specialized in the line of micro switch for 20 years , we only supply high quality products to satisfied our 

customer and win the market together .

GNBER------RY Series Player